Driver Installation For Windows 2000; Driver Installation For Windows - MSI G52-MA00353 User Manual

Driver Installation for Windows

Installing VIA® Chipset Driver
1. Insert the supplied CD disk into the CD-ROM drive.
2. The CD will auto-run and the setup screen will appear.
3. Click on Via Chipset Drivers and the screen will show VIA Service
Pack 4.XX.
4. Click Next and the screen will show a VIA Service Pack 1 README
dialog box.
5. Click Yes and the screen will show three drivers: VIA Bus Master
Ultra ATA Driver (Windows 2000), AGP VxD Driver and VIA INF
Driver 1.XX. Select all and click Next to proceed.
6. The screen will show a VIA Bus Master Ultra ATA Driver dialog
box. Select Install and then click on Next.
7. The screen will show a VIA GART AGP Driver 4.XX dialog box.
Select Install AGP 4X/133 driver and click Next.
8. There is a Read Only File Detected dialog box. Click Yes. A dialog
box Digital Signature Not Found will appear and ask "Do you want
to continue the installation of the VIA Bus Master Ultra ATA
Controller". Click Yes to continue.
9. Select Yes and then click Finish to restart the system.
10. After restart, the system will find a new hardware device and the
Found New Hardware Wizard dialog box will appear. Click Next to
the next screen and a VIA BM Ultra DMA Channel device will be
found.
11. Click Next and the driver search result will be shown on the screen.
Click Next.
12. A dialog box Digital Signature Not Found will appear. Click Yes.
13. Click Finish and then click Yes to restart the system.
14. Repeat Step 10 through Step 13 again.
15. After restart, the VIA Chipset driver installation will be complete.
Installing VIA® AC97 PCI Sound Driver
1. Make sure the supplied CD disk is in the CD-ROM drive.
2. Go to My Computer and double click the CD-ROM icon. The setup
screen will appear again.
3. Click on VIA AC97 PCI Sound Drivers and the screen will show VIA
AC97 PCI Sound Drivers.
®
2000
4-5
Installing Drivers