Canon Color imageRUNNER C3480 Easy Operation Manual page 75

User Settings
(1/1)
TX Settings
(1/1)
Fax Settings: User Settings
Unit Telephone #
See the Sending and Facsimile Guide Chapter 1
Enables you to store the machine's fax number. The number may also be displayed on the
touch panel display of the receiving party's machine, depending on their type of machine.
Tel Line Type
See the Sending and Facsimile Guide Chapter 1
Enables you to set the telephone line type.
Volume Control
Sending and Facsimile Guide Chapter 9
Enables you to set the volume for the alarm and monitor tones that the machine emits during
a fax transmission.
*5 Displayed only if the optional Super G3 FAX Board or Super G3 Multi-Line Fax Board is
installed.
Fax Settings: TX Settings
ECM TX
See the Sending and Facsimile Guide Chapter 9
Enables you to reduce the effect of system and line errors on documents that occur during
sending or receiving with another fax unit that supports ECM.
Pause Time
See the Sending and Facsimile Guide Chapter 9
Enables you to set the pause time when sending a fax.
Auto Redial
See the Sending and Facsimile Guide Chapter 9
Enables you to set the machine to automatically dial the recipient's fax number again if
the recipient cannot be dialed due to a busy line, or if a sending error occurs.
Check Dial Tone Before Sending
See the Sending an Facsimile Guide Chapter 9
Enables you to set whether to check for a dial tone before sending a fax.
*5 Displayed only if the optional Super G3 FAX Board or Super G3 Multi-Line Fax Board is
installed.
Additional Functions
74