Toshiba e-STUDIO181 Service Handbook page 126

[B] Adjustment
If the pins cannot be fitted into the holes, perform the adjustment according to the following procedure.
(1) Remove the right-hand hinge screw at the
rear side.
(2) Remove 2 screws and take off the bracket on
the rear side.
(3) Loosen the left-hand hinge screw at the rear
side.
e-STUDIO181/211
ADJUSTMENT
© 2009 TOSHIBA TEC CORPORATION All rights reserved
3 - 44
Fig. 3-40
Fig. 3-41
Fig. 3-42