For Gmail - Uniden G2701 Owner's Manual

3. Tap on the STMP Port field and enter the port number (e.g. for gmail server, enter: 465). Tap
Enter.
4. Tap on the Username field and enter the email account you want to send alert messages from
(e.g. for gmail server, enter the gmail account in full). Tap Enter.
5. Tap on the Password field and enter your email password (the password will always remain
hidden). Tap Enter.
The password entered here must be the password for the outgoing email account.
6. Tap on the Email To field and enter the email account you want to receive email alert
messages. Tap Enter.
The incoming email account can be the same as, or different from, the outgoing email ac-
count. If a different email account is used then the outgoing email account serves as a relay
for the alert messages. Only one incoming email account will be accepted by the G Series
system.
7. Tap OK to save the settings, then tap < to return to the previous screen.
If you are using Gmail as the outgoing SMTP server, check SSL and use the data in the following
table:
SMTP Server
SMTP Port
User Name
Password
Email To
28

For Gmail

smtp.gmail.com
465
XXXX@gmail.com
XXXXXXXXXXX
XXXX@gmail.com
Enter this.
Enter this.
Enter your gmail address in full,
including '@gmail.com'.
Enter the password for this
gmail account.
Enter the email address where
you want the alerts sent.