G Series Software Operation Overview; Live Screen - Uniden G2701 Owner's Manual

G SERIES SOFTwARE OPERATION OvERvIEw

Your Monitor's G Series software operates through a series of screens that let you choose groups
of operations. For example, when you tap on the camera icon in the Pop-up menus, you can set
how you want the main viewing screen - called the Live screen - to display images from the paired
cameras. You can scan between cameras, show all cameras on a single screen (Quad view), or only
display a specific camera.
The Live screen lets you view the camera transmissions. It also lets you set up your screen display
and make adjustments to it. Icons on the screen itself let you monitor power and camera status.
The G Series system always defaults to the Live screen in Quad mode after being idle for 2
minutes while in any other system screen. This default ensures that the system is ready to re-
cord video even if you forget to return to the Live screen. The system can only start a record-
ing while in Live screen mode.
The operation of the G24 or G27 monitor is identical. The only difference between the two
systems is the physical size of the monitor/receiver and how you extend the antenna.

lIvE SCREEN

SD card
status
Pop up
menus
Internet
Battery
connection
status
status
Camera number/
Record
Signal strength
status
Motion
status
Pop up
menu tab
13