Uniden G2701 Owner's Manual page 20

TROUBLESHOOTING CAMERA PAIRING
Consult the following table for camera pairing troubleshooting suggestions:
If...
the camera's signal status icon
shows no bars
the camera's signal status icon
shows one or two bars or the
video quality is poor
the camera won't pair with the
Monitor
20
Try...
• making sure the camera is plugged in and the red LED is on.
• making sure that the camera's antenna is attached and the
Monitor's antenna is extended.
• making sure the camera is paired to the correct channel
• re-pairing the camera and Monitor
See "General Guidelines" on page 8 for tips on improving video
quality.
• making sure the camera is plugged in and the red LED is on.
• pressing and releasing the pairing button quickly. Do not press
and hold the pairing button.