Items that can be set vary depending on the image signal currently being projected as shown in the following screen shots. Setting details are saved for each

image signal.

You cannot make settings in the Signal menu when the input source is LAN.

Computer image

Sub Menu

Auto Setup

Resolution

Tracking

Sync.

Position

Progressive

You can reset all adjustment values of the Image menu to their default settings. To return all menu items to their default settings, see s

You can select whether or not (On/Off) to automatically adjust the image to the optimal state when the input signal changes. s

When set to Auto, the resolution of the input signal is automatically identified. If the images cannot be projected correctly when set to Auto, such as

when some of the image is missing, adjust to Wide depending on the connected computer for wide screens, or set to Normal for 4:3 or 5:4 screens.

You can adjust computer images when vertical stripes appear in the images. s

You can adjust computer images when flickering, fuzziness, or interference appear in the images. s

You can adjust the display Position up, down, left, and right when a part of the image is missing so that the whole image is projected.

(Component Video can only be set when 480i/576i/1080i signals are being input)

Off: IP conversion is carried out for each field in the screen. This is ideal for viewing images with a large amount of movement.

Video: This is ideal for viewing general video images.

Film/Auto: This is ideal for movie films, computer graphics, and animation.

Function

Component Video

Function

p.100