Saving A User's Logo - Epson EB-460i User Manual

Saving a User's Logo

You can save the image that is currently being projected as a User's Logo.
When a User's Logo is saved, the previous User's Logo is erased.
q
Procedure
A
Project the image you want to save as the User's Logo, and
then press the [Menu] button.
Using Remote Control
B
Select User's Logo from the Extended menu in the
Configuration Menu.
p.73
Check the buttons you can use and the operations they perform in
the guide under the menu.
Using Control panel
"Using the Configuration Menu"
s
• When User's Logo Protect from Password Protect is set to On, a
q
message is displayed and the User's Logo cannot be changed. You
can make changes after setting User's Logo Protect to Off.
p.50
s
• If User's Logo is selected when one of the Keystone, E-Zoom,
Aspect, Progressive, and Zoom Adjustment functions is being used,
the function currently being used is cancelled temporarily.
C
When the message "Choose this image as the User's Logo?" is
displayed, select Yes.
When you press the [Enter] button on the remote control or the
q
control panel, the screen size may change depending on the signal to
match the actual resolution of the image signal.
D
Move the box to select the part of the image to use as the
User's Logo.
68