Makita HM0810B Instruction Manual page 6

Switch action
To start the tool, simply pull the trigger.
Release the trigger to stop. For continuous
operation, pull the trigger and then push in
the lock button. To stop the tool from the
locked position, pull the trigger fully, then
release
it.
Lock
button
Trigger switch
CAUTION :
Before plugging in the tool, always check to
see
that the trigger switch actuates porperly
and returns to the "OFF" position when released.
Chipping
.
Scaling Demolition
Hold the tool firmly with both hands. Turn the tool on and apply slight pressure on the
tool
so
that the tool will not bounce around, uncontrolled. Pressing very hard on the tool
will not increase the efficiency.
6