Page of 2
Download Bookmark Comment

Makita HM0810 User Manual

Makita tool storage user manual.
Also See for HM0810:
Instruction manual - 32 pages
T
ECHNICAL INFORMATION
Subject
For Models
Country
Description
Where Flat Washer 43 Is Placed and Three Bond 1342 Is Applied
Three Bond 1342
Tool Holder
(on three spots)
Note)
See the next page for "Service Manual for Tool Holders of Models HM0810/HM0810B/HM0810T" that we have
newly issued, taking these modifications into account.
Interchangeability(I/C)
Item No.
HM0810: 093
HM0810B: 086
HM0810T: 081
HM0811: 095
HM0821: 090
HM0810: 034
HM0811: 036
HM0821: 034
HM0810, HM0811,
HM0821: 500
HM0810B: 031
HM0810T: 032
Note
Interchangeability mark ;
Implementation
HM0810 : From serial No.405169E (May,1999)
HM0810B : From serial No.37902E (May,1999)
HM0810T : From serial No.57443E (May,1999)
Modifications on Tool Holder
HM0810, HM810B, HM0810T, HM0811, HM0821
All countries
As illustrated below;
1) Flat Washer 43 (Part No.267203-1) has been added as illustrated below in order to
fasten Tool Holer on Barrel Complete straightly with further accuracy.
2) The adhesive, Three Bond 1342 has been added on three spots of the thread of Tool Holder
as illustrated below to prevent Tool Holder from loosening.
3) In accordance with the modifications of 1) and 2), Tool Holders / Tool Holder Assemblies
for repairing of the subject Models have been changed to Tool Holder Sets.
These Tool Holder Sets additionally include each one piece of Flat Washer 43 (Part No.267203-1)
and O ring 38 (Part No.213508-7), which might necessarily be replaced whenever Tool Holders
/ Tool Holder Assemblies are replaced in repairing.
See the column of Interchangeability for Part Nos. of Tool Holder Sets.
Flat Washer 43
(color; gold, material; brass)
Current part
Tool Holder
322594-8
Tool Holder Ass'y
134716-6
Tool Holder
323790-1
Tool Holder Ass'y
125070-9
means that the new part is substituted for the current.
O Ring 38
New part
Q'ty
I/C
Three Bond 1342(50g)
045017-6A
Flat Washer 43
267203-1
Tool Holder Set
1
193003-2
Tool Holder Set
1
193010-5
Tool Holder Set
1
193005-8
Tool Holder Set
1
193004-0
HM0811 : Discontinued since Apr.,1989
HM0821 : Discontinued since June,1991
58512,58814
Barrel Complete
Q'ty
Note
For all Models
0.1g
For all Models
1
1
HM0810, HM0811
HM0821
1
1
HM0810B
HM0810T
1

   Also See for Makita HM0810

   Related Manuals for Makita HM0810

   Summary of Contents for Makita HM0810

  • Page 1

    Where Flat Washer 43 Is Placed and Three Bond 1342 Is Applied Three Bond 1342 Tool Holder (on three spots) Note) See the next page for "Service Manual for Tool Holders of Models HM0810/HM0810B/HM0810T" that we have newly issued, taking these modifications into account. Interchangeability(I/C) Item No. Current part...

  • Page 2

    Service Manual for Tool Holders of Models HM0810/ HM0810B/ HM0810T When re-securing Tool Holder in repairing, always take the steps of procedure as described below. 1) How to Remove Tool Holder (a) Hold the machine tightly with a vise as in Fig.(1).

This manual also for:

Hm0810t, Hm0811, Hm0821, Hm810b

Comments to this Manuals

Symbols: 0
Latest comments: