The typical weighted root mean square acceleration value is 12 m/s These values have been obtained according to EN60745. Yasuhiko Kanzaki CE 2005 Director MAKITA INTERNATIONAL EUROPE LTD. Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 8JD, ENGLAND Responsible manufacturer: Makita Corporation Anjo Aichi Japan...
Page 4
Symbols The following show the symbols used for the tool. Be sure that you understand their meaning before use. Read instruction manual. DOUBLE INSULATION Only for EU countries Do not dispose of electric equipment together with household waste material! In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with national law, electric equipment that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facil- ity.
ENGLISH Explanation of general view Switch trigger 11 Lock nut wrench Change ring Hex wrench 12 Crank cap Side grip Rear cover 13 Hammer grease Grip base Screwdriver Lock button 10 Brush holder cap GENERAL SAFETY RULES 11. Avoid accidental starting. Ensure the switch is in the off-position before plugging in.
MISUSE or failure to follow the safety rules stated in made of resin and is subject to breakage. this instruction manual may cause serious personal To maintain product safety and reliability, repairs, mainte- injury. nance or adjustment should be carried out by a Makita Authorized Service Centre.
Page 7
ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
Page 8
Makita Corporation Anjo, Aichi, Japan 884096C223...