Lcd Panel Removal; Cleaning The Lcd Panel - Sony KLV-46V510A Service Manual

1-7. LCD PANEL REMOVAL

1
Remove LVDS cable and holder from TCON and LCD panel
2
Remove 2 screws and release LCD panel from Bezel
3
Disconnect 2 connectors from Inverter Board
4
Remove 3 screws and detach Heat Sink from LCD Panel
5
Gently remove Radiation Sheet
6
Carefully peel off Insulating Sheet from LCD Panel
NOTE: Heat Sink, Radiation Sheet and Insulating Sheet are not included in LCD Panel unit.
For part number information, refer to the Exploded View Section of this manual.
Heat Sink
Radiation
Sheet
Soft Cloth

1-7-1. CLEANING THE LCD PANEL

CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of electric shock.
Clean the cabinet of the TV with a dry soft cloth.
Wipe the LCD screen gently with a soft cloth.
→
Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.
→
If using a chemically pretreated cloth, please follow the instruction provided on the package.
→
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
→
Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.
KLV-40V510A/46V510A
Insulating Sheet (IP2)
Detail Double Sided Tape
KLV-46V510A Only
1
4 Screw,
+PSW M3X8
5
Insulating Sheet (IP1)
Detail
Double Sided Tape
KLV-40V510A Only
6
2 Screw,
+BVTP2 4X16
KLV-40V510A/46V510A
3
LCD Panel
Bezel
18