Self-Diagnostic Function - Sony KLV-46V510A Service Manual

The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY LED indicator will automatically begin to fl ash. The number
of times the LED fl ashes translates to a probable source of the problem. A defi nition of the STANDBY LED fl ash indicators is listed in the instruction
manual for the user's knowledge and reference. If an error symptom cannot be reproduced, the Remote Commander can be used to review the failure
occurrence data stored in memory to reveal past problems and how often these problems occur.
1. Diagnostic Test Indicators
When an error occurs, the STANDBY LED indicator will fl ash a set number of times to indicate the possible cause of the problem. If there is more than
one error, the indicator will identify the fi rst of the problem areas.
LED Indicators
Description of LED Indictors
LED
POWER LED
STANDBY LED
PIC OFF/
TIMER
LED
KLV-40V510A/46V510A

SELF-DIAGNOSTIC FUNCTION

PIC OFF / TIMER
LED Type
Green LED
Red LED
Amber or Green
LED
2 times
5 times
LED ON 0.3 sec.
LED OFF 0.3 sec.
STANDBY
Description
* Lights up in green when the TV set is turned on.
* Lights up in red when the function PC Power
Management is activated and there is no signal
received while in the PC input.
* If LED blinks continuously, this may indicate
that the TV needs servicing.
* Lights up in amber when the Timer or Sleep
functions are set. When timer is set, this LED
remains lit even when the TV is turned off.
* Lights up in green when the Backlight feature is
activated to Off.
LED OFF
3 sec.
KLV-40V510A/46V510A
Self Diagnosis
Supported model
POWER
10