Sony KLV-32V530A Service Manual

Sony KLV-32V530A Service Manual

Lcd color tv
Hide thumbs Also See for KLV-32V530A:
Table of Contents

Advertisement

Quick Links

SERVICE MANUAL
MODEL
COMMANDER
KLV-32V530A
RM-GA015
KLV-32V550A
RM-GA015
KLV-32V550A/R
RM-GA015
(Red)
KLV-32V550A/W
RM-GA015
(White)
KLV-40V530A
RM-GA015
KLV-32 V530A, V550A, V550A/R, V550A/W
KLV-46V550A
DEST.
MODEL
KLV-40V550A
ME
India, ME, Philippines,
Russia, South Africa,
Thailand, Tunisia
KLV-40V550A/R
ME, Philippines,
(Red)
Thailand, South Africa
KLV-40V550A/W
ME, Philippines,
(White)
Thailand, South Africa
KLV-46V550A
ME
KLV-52V550A
RM-GA015
EX2L
COMMANDER
RM-GA015
RM-GA015
RM-GA015
RM-GA015
RM-GA015
KLV-40 V530A, V550A, V550A/R, V550A/W
KLV-52V550A
LCD COLOR TV
CHASSIS
DEST.
India, Iran, ME,
Philippines, Russia,
South Africa,
Thailand, Tunisia
ME, Philippines,
Thailand, South Africa
ME, Philippines,
Thailand, South Africa
India, ME, Philippines,
Russia, South Africa,
Thailand
India, Iran. ME,
Philippines, Russia,
South Africa,
Thailand, Tunisia

Advertisement

Table of Contents
loading

Summary of Contents for Sony KLV-32V530A

  • Page 1 SERVICE MANUAL EX2L CHASSIS MODEL COMMANDER DEST. MODEL COMMANDER DEST. KLV-32V530A KLV-40V550A RM-GA015 RM-GA015 India, Iran, ME, KLV-32V550A Philippines, Russia, RM-GA015 India, ME, Philippines, South Africa, Russia, South Africa, Thailand, Tunisia Thailand, Tunisia KLV-40V550A/R RM-GA015 ME, Philippines, KLV-32V550A/R RM-GA015 ME, Philippines,...
  • Page 2: Table Of Contents

    KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 TABLE OF CONTENTS Section Title Page Section Title Page 1. SAFETY NOTES 7. DIAGRAMS 1-1. Caution Handling of LCD Panel ........3 7-1. Block Diagram ............. 44 1-2. Safety Check Out ............3 7-2.
  • Page 3: Safety Notes

    OPERATION. REPLACE THESE COMPONENTS WITH 6) Check the line cords for cracks and abrasion. SONY PARTS WHOSE PART NUMBERS APPEAR AS Recommend the replacement of any such line cord to the SHOWN IN THIS MANUAL OR IN SUPPLEMENTS customer.
  • Page 4: Lead Free Information

    This requires soldering equipment capable of accurate temperature control coupled with a good heat recovery characteristics. For more information on the use of Lead Free Solder, please refer to http://www.sony-training.com (2) Press position (NG for red marking portion) 1-6. Attachment & Detachment of MDF61 Connector...
  • Page 5 KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 b) Detachment c) Confirmation of Lock Condition (1) Hold between the lock part and harness of socket. (1) Confirm the lock conditions. When lock is completed, Release the lock and pull out connector within 20 base and socket must be same line as shown in Figure degree.
  • Page 6: Removal And Installation Of Rear Cover Procedure

    KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 1-8. REMOVAL AND INSTALLATION OF REAR COVER PROCEDURE a) REMOVAL Note: Please refer to Section 4 : Disassembly for screws informations . PULL PUSH POINT PUSH a. PHOTO SHOW THE POSITION c.
  • Page 7: Removal Of Switch Unit Procedure

    KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 1-9. Removal of Switch Unit Procedure a) REMOVAL Push this position to remove Push and slant towards inner side of set. Switch Unit more easily Push and slant towards inner side of set to remove Switch Unit correctly. –...
  • Page 8: Self Diagnostic Function

    KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 SECTION 2 SELF DIAGNOSTIC FUNCTION 2-1. Overview of Control Buttons 2-4. LED Pattern When safety shutdown occurs, Standby LED display reports the cause by using the lightning patterns as indicated below. Power PROG +/-/ 2.0 sec...
  • Page 9: Standby Led Error Display

    KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 2-5. Standby LED Error Display Perform below countermeasures according to Standby LED blinking times. Blinking times Error Countermeasure DC_DET Replace either/all z Power board - Power Unit(32" & 52") - IP1 (40") - IP2 (46") z BA Board DC_ALERT...
  • Page 10: Triage Chart

    KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 2-6. Triage Chart – 10 –...
  • Page 11: Troubleshooting

    KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 SECTION 3 TROUBLESHOOTING 3.1 Flowchart 3-1-1. Flowchart A(i) Flowchart A(ii) No Power/Shut down/No Picture Try On/Off at Main SW and with Remote Commander Check Harness holder, Header pin Is it LED(STBY) Is it correct and Wire harness.
  • Page 12 KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 3-1-2. Flowchart B 3-1-3. Flowchart C – 12 –...
  • Page 13: Board Replacement Order

    KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 3-1-4. Flowchart D Panel Problem Is it LED(STBY) Backlight indicator turn on turn on? or blinked? Count blink and replace board to Re-connect LVDS wire at T-Con Is it correct obey with 2-6 triage chart. and at BA board.
  • Page 14 KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 3-2-2. In case of most doubtful part is BA Board 3-2-3. In case of most doubtful part is Panel module, T-con Board – 14 –...
  • Page 15 KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 3-2-4. In case of most doubtful part is BA Board – 15 –...
  • Page 16: Disassembly

    KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 SECTION 4 DISASSEMBLY Note: 1) The illustrations provided in this section might have slight difference from actual sets. 2) Refer to Removal & Installation of Rear Cover and Switch Unit Procedure in Section 1 Safety Notes. 4-1.
  • Page 17 KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 4-1-8. Panel Removal 4-1-7. Speaker, HSN and HL1A boards Removal 1 Harness with connector 1 Speaker (4.2 X 15.5cm) 3 Remove connector 2 One screw 4 HSN board (+BVTP 3 X 12) 2 LCD panel 5 Guide, IR (C) 6 Remove connector...
  • Page 18: Klv-46V550A

    KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 4-2-5. BA Board Removal 4-2-6. Frame Removal 1 Bracket Side Jack 3 Nine screws 1 Cover, Under (M) (+BVST 3 X 8) 2 Three screws (+PSW M4 X 8) 4 BA board 5 Frame Spine (40R) 2 Remove connectors 3 Frame Spine (40L)
  • Page 19 KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 4-3-3. Switch Unit Removal 4-3-4. IP2 Board Removal 1 Two screws (+BVST 3 X 8) 2 Two screws (+BVST 3 X 8) 3 Switch unit 2 Lift tabs to 3 IP2 board remove board 4 Five connectors 4-3-5.
  • Page 20: Klv-52V550A

    KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 4-4. KLV-52V550A 4-4-1. Rear Cover Removal 4-4-2. Stand Assy Removal 1 Four screws (+PSW M5 X 16) Four screws (+PSW M4 X 12) 2 Stand assy One screw (+BVTP 3 X 12) Twenty screws 3 One screw (+BVTP2 4 X 16)
  • Page 21 KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 4-4-7. BA Board Removal 4-4-8. Frame Removal 1 Bracket Side Jack 1 Frame Vesa Top (52) 2 One screw (+BVST 3 X 8) 2 Nine screws (+BVST 3 X 8) 3 Frame, G 5 Frame, Center 4 Two screws 4 BA board...
  • Page 22: Wire Dressing

    KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 SECTION 5 CAUTION : WIRE DRESSING 1. Do not overpull the wires during dressing --> avoid disconnection of wires. 2. Make sure wires are kept away from sharp edges, heatsinks & other high-temperature parts.
  • Page 23 KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 5-1-3. P.3 Area SHEET(CORE)C 1-910-053-97 Make sure wire and Sheet Core(C) are not at clear panel area. Pull wire to this direction. HL1A Board Process the harness through the slit. 5-1-4. P.4 Area SHEET(CORE)C 1-910-053-97 HSN Board...
  • Page 24 KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 5-1-5. P.5 Area CLAMP SHEET(CORE)C 1-910-053-97 CLAMP Pull wire to this direction Make sure speaker wire away from screw boss. To prevent sandwiched by Rear Cover during installation. 5-1-6. P.6 Area 1-910-053-97 Push in the direction of the arrow.
  • Page 25 KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 5-1-7. P.7 Area CLAMP Power Unit SHEET(CORE)C 1-910-053-99 5-1-8. P.8 Area Apply Sheet Core(C) at first slit from LVDS. 1-910-053-99 CLAMP SHEET(CORE)C Don't let wire loose – 25 –...
  • Page 26 KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 5-1-9. P.9 Area T-CON Salient under T-con The fourth position from the right LVDS SHEET(CORE)C CLAMP Tape, Electric Conduction(QT2) CLAMP Cover Tape, Electric Conduction with Sheet(core)C more than the half. 5-1-10. P.10 Area Power Unit Install SHEET(CORE)A to CORE ForTaiwan only...
  • Page 27: V530A, V550A, V550A/R, V550A/W

    KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 5-2. KLV-40 V530A, V550A, V550A/R, V550A/W 5-2-1. Wire Dressing Overview ◊ Note: For details of each area dressing, refer to area information 5-2-2. P.2 Area Please fix the harness Balancer at a position of UL TAPE HSW3 Board About the harness processing to H1SW Board...
  • Page 28 KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 5-2-3. P.3 Area 1-910-053-94 SHEET(CORE)C Make sure wire and Sheet Core(C) are not at clear panel area. SHEET(CORE)C Prevention of insertion of the harness by rear cabinet. Pull speaker wire away from speaker screw boss.
  • Page 29 KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 5-2-5. P.5 Area 1-910-053-94 Push in the direction of the arrow. Put the habit on the lead. Make sure H wire is beneath the power wire. Please install Cushion D to H lead. (Side:30xLength:40) BA Board CLAMP...
  • Page 30 KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 5-2-7. P.7 Area SHEET(CORE)A MV HARNESS Make sure wire is straight. Make sure wire is straight. Balancer CLAMP IP1 Board 1-910-053-96 SHEET(CORE)C 5-2-8. P.8 Area T-CON Install LVDS clamp to panel as shown. Otherwise, LVDS CLAMP LVDS cable suffers stress to connector.
  • Page 31 KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 5-2-9. P.9 Area IP1 Board AC INLET CLAMP – 31 –...
  • Page 32: Klv-46V550A

    KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 5-3. KLV-46V550A 5-3-1. Wire Dressing Overview ◊ Note: For details of each area dressing, refer to area information 5-3-2. P.2 Area Please fix the harness at a position of UL TAPE Balancer HSW3 Board About harness processing to H1SW...
  • Page 33 KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 5-3-3. P.3 Area 1-910-053-91 Please Wire harness and SHEET(CORE)C avoid a clear panel area. SHEET(CORE)C Prevention of insertion of the harness by rear cabinet. Pull wire to this direction. HL1A Board Process the harness through the slit.
  • Page 34 KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 5-3-5. P.5 Area 1-910-053-91 BA Borad CLAMP 5-3-6. P.6 Area Push in the direction of the arrow. Put the habit on the lead. 1-910-053-91 IP2 Board 1-910-053-92 BA Board Make sure H wire is beneath the power wire.
  • Page 35 KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 5-3-7. P.7 Area Balancer Make sure wire is straight Make sure wire is straight HV HARNESS SHEET(CORE)A IP2 Board 1-910-054-12 SHEET(CORE)C 5-3-8. P.8 Area T-CON LVDS CLAMP SHEET(CORE)C CLAMP BA Board –...
  • Page 36 KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 5-3-9. P.9 Area IP2 Board AC INLET – 36 –...
  • Page 37: Klv-52V550A

    KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 5-4. KLV-52V550A 5-4-1. Wire Dressing Overview P.11 P.10 P.7 P.8 P.12 Note: For details of each area dressing, refer to area information 5-4-2. P.2 Area Please fix the harness at a Balancer position of UL TAPE HSW3 Board...
  • Page 38 KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 5-4-3. P.3 Area 1-910-054-00 Please avoid a clear panel area. Pull wire to this direction. SHEET(CORE)C HL1A Board Dress wire at slit (3x) 5-4-4. P.4 Area SHEET(CORE)C 1-910-054-00 CLAMP Please avoid frame area to hit the screw later HSN Board Pull speaker wire away from speaker screw boss.
  • Page 39 KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 5-4-5. P.5 Area Push in the direction of the arrow. Put the habit on the lead. 1-910-054-00 1-910-054-01 Power Unit Make sure H wire is beneath the power wire. Please install Cushion D to H lead. (Side: 30mm x Length:40mm) BA Board CLAMP...
  • Page 40 KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 5-4-7. P.7 Area Make sure electric harness is on top of other wires. CLAMP 1-835-715-11 1-836-138-11 1-910-054-02 Make sure electric harness is on top of other wires and avoid touching coil. Power Unit D5N Board 1-910-054-02...
  • Page 41 KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 5-3-9. P.9 Area D6N Board CLAMP 1-836-138-11 1-910-054-13 CLAMP 5-3-10. P.10 Area Balancer HV HARNESS Make sure wire is straight SHEET(CORE)C D6N Board process the harness straight – 41 –...
  • Page 42 KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 5-4-11. P.11 Area T-CON Install LVDS clamp to panel as shown. Otherwise, LVDS LVDS cable suffers stress to connector. Don't add a stress to the connector of the LVDS cable. CLAMP SHEET(CORE)C SHEET(CORE)C Do not enter Board.
  • Page 43: Service Adjustments

    KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 SECTION 6 SERVICE ADJUSTMENTS 6-1. Viewing Service Adjustment Data 6-3. Accessing Diagnostic Menu There are no adjustments necessary for these models. 1. While TV on standby, press the following sequence on the All data have been set for optical viewing for customers.
  • Page 45: Connector Diagrams

    KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 7-2. CONNECTOR DIAGRAM 7-2-1. KLV-32 V530A, V550A, V550A/R, V550A/W T-CON Power Unit CN6101 AC Power HSW3 HL1A CNXXX CN301 CN401 Speaker R Speaker L 7-2-2. KLV-40 V530A, V550A, V550A/R, V550A/W, 46V550A T-CON CN6154 (40")
  • Page 46: Klv-52V550A

    KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 7-2-3. KLV-52V550A T-CON CN6950 CN6302 CN6201 Power Unit CN6703 CN6104 AC Power HSW3 HL1A CNXXX CN301 CN401 Speaker R Speaker L – 46 –...
  • Page 47: Circuit Board Location

    KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 7-3. Circuit Board Location 7-3-1. KLV-32 V530A, V550A, V550A/R, V550A/W Switch Unit Power Unit HL1A Board BA Board HSN Board 7-3-2. KLV-40 V530A, V550A, V550A/R, V550A/W Switch Unit IP1 Board HL1A Board BA Board HSN Board –...
  • Page 48: Klv-46V550A

    KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 7-3-3. KLV-46V550A Switch Unit IP2 Board HL1A Board BA Board HSN Board 7-3-4. KLV-52V550A D5N Board Power Unit Switch Unit D6N Board HL1A Board BA Board HSN Board – 48 –...
  • Page 49: Schematic Diagram

    KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 7-4. SCHEMATIC DIAGRAM 7-5. PRINTED WIRING BOARDS Board Function Note HDMI(EQ SW), VIDEO SW, SUB CHROMA, POWER(EMMA), CLK/ PERIPHERAL, ROM-IF/ STRAPS, DDR2, ETHERNET/USB, VIDEO IN/OUT, HDMI/PANEL OUT, AUDIO IN/OUT, STANDBY_MICRO Due to complexity of the board, performing component (MIMAS), POWER, level field repairs are not recommended.
  • Page 50: Exploded Views

    X-2349-158-1 STAND ASSY(M2) (KLV-32V550A(India, Philippines, Thailand)) X-2348-424-1 STAND ASSY(M2)(R) (KLV-32V550A/R) X-2348-290-1 STAND ASSY(M2)(W) (KLV-32V550A/W) X-2345-160-1 STAND ASSY(M2) (KLV-32V530A, 32V550A(ME, Tunisia, South Africa, India, Philippines, Thailand, Russia)) X-2349-323-1 STAND ASSY(M2)(R) (KLV-32V550A/R(Thailand, Philippines)) X-2349-322-1 STAND ASSY(M2)(W) (KLV-32V550A/W(Thailand, Philippines)) 4-130-658-01 LABEL, REAR TERMINAL(L) (KLV-32V530A)
  • Page 51 BEZEL ASSY(32C)(W) (KLV-32V550A/W) X-2349-391-1 BEZEL ASSY(32C) (KLV-32V530A) 52 ! 1-802-801-12 LCD PANEL(32INCH FHD TFT) 1-858-184-11 LOUD SPEAKER A-1706-632-A BA COMPL(SERVICE) (Except KLV-32V530A, 32V550A(Russia, Tunisia)) A-1709-774-A BA COMPL(SERVICE) (KLV-32V530A) A-1729-823-A BA COMPL(SERVICE) (KLV-32V550A(Russia, Tunisia)) 4-125-783-21 BRACKET, SIDE JACK(EX2L) 4-127-409-01 COVER, UNDER(S)
  • Page 52: V530A, V550A, V550A/R, V550A/W

    KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 8-2 KLV-40 V530A, V550A, V550A/R, V550A/W 8-2-1. REAR CABINET AND STAND ASSY REF. NO. PART NO. DESCRIPTION REMARK X-2348-900-1 REAR COVER(40) ASSY X-2348-754-1 REAR COVER(40) ASSY (KLV-40V550A(Thailand, India, Philippines), 40V550A/R(Thailand, Philippines), 40V550A/W(Thailand, Philippines)) * 4-115-101-01 COVER, ECS...
  • Page 53 1-487-234-11 SWITCH UNIT A-1660-720-A IP1 COMPL 64 ! 1-822-147-11 AC INLET ! 1-822-617-11 AC INLET FILTER 4-103-642-21 EMBLEM, SONY NO.8 (Except KLV-40V550A/W) 2-661-171-01 SPRING, PANEL (KLV-40V550A(Tunisia, Russia)) 2-682-457-01 SPRING, PANEL(26) Note: The components identified by mark contain (KLV-40V550A(Tunisia, Russia)) confidential information. Strictly follow the instructions whenever the components are repaired and /or replaced.
  • Page 54: Klv-46V550A

    KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 8-3 KLV-46V550A 8-3-1. REAR CABINET AND STAND ASSY REF. NO. PART NO. DESCRIPTION REMARK X-2345-429-1 REAR COVER(46) ASSY * 4-115-101-01 COVER, ECS * 3-106-086-01 COVER, ECS * 4-127-924-01 COVER, ECS(S) X-2345-868-1 STAND ASSY(L2A) –...
  • Page 55 * A-1660-728-A IP2 COMPL 64 ! 1-822-147-11 AC INLET ! 1-822-617-11 AC INLET FILTER 2-635-749-11 EMBLEM, SONY NO.9 Note: The components identified by mark contain confidential information. Strictly follow the instructions whenever the components are repaired and /or replaced. – 55 –...
  • Page 56: Klv-52V550A

    KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 8-4 KLV-52V550A 8-4-1. REAR CABINET AND STAND ASSY REF. NO. PART NO. DESCRIPTION REMARK X-2348-971-1 REAR COVER(52) ASSY * 4-115-101-01 COVER, ECS * 3-106-086-01 COVER, ECS * 4-127-924-01 COVER, ECS(S) X-2345-870-1 STAND ASSY(LL2A) –...
  • Page 57 AC INLET FILTER(KLV-52V550A(Russia, Tunisia)) * A-1663-196-A D5N COMPL * A-1663-200-A D6N COMPL 4-129-446-01 FRAME, VESA TOP(52) 2-635-749-11 EMBLEM, SONY NO.9 2-661-200-01 SPRING, PANEL(KLV-52V550A(Russia)) Note: The components identified by mark contain confidential information. Strictly follow the instructions whenever the components are repaired and /or replaced.
  • Page 58: Electrical Parts List

    4-138-285-31 MANUAL, INSTRUCTION (CN1300(BA)-CN6201(G2BE)(1)) (KLV-32V550A(Philippines), 32V550A/R(Philippines), * 1-910-053-99 CONNECTOR ASSY 14P 32V550A/W(Philippines)) (CN1301(BA)-CN6202(G2BE)-INV(1)) 4-135-850-11 MANUAL, INSTRUCTION (KLV-32V530A, 32V550A(ME, Tunisia, South Africa), 32V550A/R(South Africa, ME), *********************************************************************** 32V550A/W(South Africa, ME)) 4-135-850-21 MANUAL, INSTRUCTION ACCESSORIES AND PACKING (KLV-32V550A(ME), 32V550A/R(ME), *************************** 32V550A/W(ME)) * 4-131-728-01...
  • Page 59 CUSHION, UPPER (INVERTER(2), HARNESS(3), SWITCH(1), * 4-131-732-01 CUSHION, LOWER LVDS(1), FRAME BOTTOM(1)) * 4-133-316-01 INDIVIDUAL CARTON (KLV-32V530A, 32V550A(ME, Tunisia, South Africa), (KLV-40V530A, 40V550A(ME, Tunisia, South Africa, 32V550A/R(South Africa, ME), Russia), 40V550A/R(ME, South Africa), 32V550A/W(South Africa, ME)) 40V550A/W(ME, South Africa)) * 4-138-284-01...
  • Page 60: Klv-46V550A

    KLV-32, 40 V530A, 32, 40, 46, 52 V550A RM-GA015 REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK MISCELLANEOUS * 4-131-735-01 CUSHION, LOWER ***************** * 4-133-177-01 INDIVIDUAL CARTON X-2348-140-1 BAG ASSY, FALL LOCK BELT 4-100-136-01 SHEET(CORE), C (HARNESS(3), BEZEL(1), BALANCER(1), 2-580-604-01 SCREW, +PSW M4X20...
  • Page 61: Klv-52V550A

    POWER SUPPLY CORD (KLV-52V550A(ME)) 4-100-136-01 SHEET(CORE), C ! 1-835-138-11 POWER-SUPPLY CORD SET (HARNESS(4), BALANCER(1), BEZEL(1), (KLV-52V550A(ME, Philippines)) SWITCH(1), LVDS(2), INVERTER(3)) (KLV-52V550A(ME, Iran, Tunisia, South Africa, Russia)) Sony Corporation Sony EMCS (Malaysia) Sdn. Bhd. English 9-888-107-01 FTVG  2009.2 – 61 –...
  • Page 62: Operating Instructions

    LCD Colour TV Operating Instructions KLV-52V550A KLV-46V550A KLV-40V550A KLV-40V530A KLV-32V550A KLV-32V530A © 2009 Sony Corporation 4-135-850-11(1)
  • Page 63 Introduction Trademark information Thank you for choosing this Sony product. HDMI, the HDMI logo and High- Before operating the TV, please read this Definition Multimedia Interface are manual thoroughly and retain it for future trademarks or registered trademarks of reference.
  • Page 64 Table of Contents Usin Start-up Guide Safety Information ..........................8 Precautions ............................9 Remote and TV Controls/Indicators ....................10 Watching TV Watching TV ............................15 Using the Favourite List ........................17 Usin Using Optional Equipment Connecting Optional Equipment ....................18 Viewing Pictures from Connected Equipment ................20 Playing back Photo/Music/Video via USB ..................21 Using BRAVIA Sync with Control for HDMI..................22 Usin...
  • Page 65: Start-Up Guide

    Start-up Guide Before Use 1: Attaching the stand (For KLV-46/40/32V550A/ To check the accessories KLV-40/32V530A) AC power cord (For KLV-52/46/40V550A/ KLV-40V530A) Cable holder (1) (For KLV-52/46/40V550A/ KLV-40V530A) Stand (1) and screws (4) (For KLV-46/40/32V550A/ KLV-40/32V530A) Remote RM-GA015 (1) Size AA batteries (R6 type) (2) To insert batteries into the remote Push and lift the cover to open.
  • Page 66 (not screw with a strong cord (not supplied). supplied) • An optional Sony support belt kit is used to secure S-Video the TV. Contact your nearest Sony service centre cable to purchase a kit. Have your TV model name (not ready for reference.
  • Page 67 4: Bundling the cables 5: Performing the initial set-up KLV-52V550A/46V550A/ 40V550A/KLV-40V530A * The shapes of mains plug/AC power plug and mains socket/AC power outlet differ depending on the region. Follow the instructions on the screen. • Do not bundle the mains lead/AC power cord Location: Select “Home”...
  • Page 68 Adjusting the viewing angle Detaching the Table-Top of the TV Stand from the TV This TV can be adjusted within the angles shown below. • Remove the screws guided by the arrow marks of the TV. Adjust the angle left and right (swivel) •...
  • Page 69: Safety Information

    – Keep the AC power cord away from • It is strongly recommended that you use carry out wall installations. a Sony wall-mount bracket in order to heat sources. • For safety reasons, it is strongly provide adequate air-circulation. recommended that you use Sony –...
  • Page 70: Precautions

    Mercury is sometimes contained depending on the kind of following problems occur. fluorescent tubes. Follow your local Ask your dealer or Sony service centre to ordinances and regulations for disposal. have it checked by qualified service Handling and cleaning the personnel.
  • Page 71: Remote And Tv Controls/Indicators

    Remote and TV Controls/Indicators Remote and TV controls Buttons on the TV will work the same as those on the remote. * In the TV menu, these buttons will work as • The number 5, N, PROG + and AUDIO buttons on the remote have a tactile dot.
  • Page 72 6 RETURN Press to return to the previous screen of the displayed menu. When playing a photo/music/video file: Press to stop the playback (the display returns to the file or folder list). 7 PROG +/–/ In TV mode: Press to select the next (+) or previous (–) channel.
  • Page 73 qg Coloured In Text mode: When the coloured buttons are buttons available, an operation guide appears on the screen. qh Number In TV mode: Press to select channels. For buttons channel numbers 10 and above, press the next digit quickly. In Text mode: Press to enter a page number.
  • Page 74 • When you change the “Scene Select” setting, Theatre Mode turns off automatically. • “Control for HDMI” (BRAVIA Sync) is only available with the connected Sony equipment that has the BRAVIA Sync or BRAVIA Theatre Sync logo or is compatible with control for HDMI.
  • Page 75 Indicators Indicator Description 1 Light sensor Do not put anything over the sensor, doing so may affect its function. (page 24) 2 Remote control Receives signals from the remote. sensor Do not put anything over the sensor. The sensor may not work properly. (Picture Off / Lights up in green when you select “Picture Off”...
  • Page 76: Watching Tv

    Watching TV To access Text Watching TV Press /. Each time you press /, the display changes cyclically as follows: Text and TV picture t Text t No Text (exit the Text service) To select a page, press the number buttons or To hold a page, press To reveal hidden information, press •...
  • Page 77 To change the Wide Mode manually Press repeatedly to select the desired Wide Mode. Wide Zoom* Enlarges the centre portion of the picture. The left and right edges of the picture are stretched to fill the 16:9 screen. Normal Displays the 4:3 picture in its original size.
  • Page 78: Using The Favourite List

    Using the Favourite List Favourites The Favourite feature lets you select programmes from a list of up to 16 favourite channels that you specify. Press Perform the desired operation as shown in the following table or displayed on the screen. Favourite List Do this Watch a channel...
  • Page 79: Using Optional Equipment

    Using Optional Equipment Connecting Optional Equipment You can connect a wide range of optional equipment to your TV. Digital still camera Not available for KLV-40/ Camcorder 32V530A USB storage media Hi-Fi audio equipment Camcorder Headphones Home theatre system DVD player with Audio system component output Video game...
  • Page 80 PC/HDMI 1 AUDIO IN socket/jack in the PC IN sockets/jacks. • Be sure to use only an authorized HDMI cable bearing the HDMI logo. We recommend that you use a Sony HDMI cable (high speed type). 1 or 2...
  • Page 81: Viewing Pictures From Connected Equipment

    The picture from the connected PC or Viewing Pictures from equipment is displayed in full size and the TV programme is displayed in the bottom Connected Equipment right corner. Turn on the connected equipment, then The sub screen picture is framed in gray perform the following operation.
  • Page 82: Playing Back Photo/Music/Video Via Usb

    Frame Image” and press The data on the USB device may be damaged. • Sony will not be held liable for any damage to, or Press RETURN repeatedly to return to loss of, data on the recording media due to a the Home Menu.
  • Page 83: Using Bravia Sync With Control For Hdmi

    • Adjusts the volume (2 +/–) and mutes the sound (%) of a connected audio system. • You can operate the connected Sony equipment that has the BRAVIA Sync logo by the TV remote by pressing: – N/x/X/m/M to operate the connected equipment directly.
  • Page 84: Using Menu Functions

    Using Menu Functions Navigating through TV Home Menu on XMB™ The XMB™ (XrossMediaBar) is a menu of BRAVIA features and input sources displayed on the TV screen. The XMB™ is an easy way to select programmes and adjust settings on your BRAVIA TV. Press HOME to display the XMB™.
  • Page 85: Tv Settings Menu

    TV Settings Menu System Update Used to update the TV’s system software in the future. Clock/Timers Sleep Timer Sets the TV to automatically switch to standby mode after a certain amount of time. When “Sleep Timer” is activated, the (Timer) indicator on the TV front panel lights up in orange.
  • Page 86 Picture Mode Sets a picture mode. The options that can be selected differ depending on the scene select settings. Vivid Enhances picture contrast and sharpness. Standard For standard pictures. Recommended for home entertainment. Custom Allows you to store your preferred settings. Cinema For viewing film-based content.
  • Page 87 Advanced Settings Allows you to set “Picture” settings in more detail. These settings are not available when “Picture Mode” is set to “Vivid” (or “Photo-Vivid”). Reset Resets all the advanced settings to the factory settings. Black Corrector Enhances black areas of the picture for stronger contrast. Adv.
  • Page 88 Surround Allows you to select the suitable surround effects depending on the genre of TV programme (movie, sport, music, etc.) or video game. The options that can be selected differ depending on the “Scene Select” settings. S-FORCE Front Delivers surround effects that help you enjoy the virtual Surround multi-ch surround audio with just the two internal TV speakers.
  • Page 89 4:3 Default Sets the default Wide Mode for 4:3 broadcasts. Wide Zoom Enlarges the 4:3 picture to fill the 16:9 screen, keeping the original image as much as possible. Normal Displays conventional 4:3 broadcasts in the correct proportion. Uses the setting that you specified in “Wide Mode”. Display Area Adjusts the picture display area.
  • Page 90 Audio Settings Speaker TV Speaker Turns on and outputs the TV’s sound from the TV speakers. Audio System Turns off the TV speakers and outputs the TV’s sound from external audio equipment connected to the audio output sockets/jacks on the TV. You can also turn on the connected equipment that is compatible with control for HDMI, after making the appropriate settings of control for HDMI.
  • Page 91 HDMI. When set to “On”, the following functions are available. If the specific Sony equipment that is compatible with control for HDMI is connected, this setting is applied to the connected equipment automatically when the “Control for HDMI”...
  • Page 92 Favourite Set-up Allows you to set your favourite channels by assigning the desired channel numbers. To reset the favourite channels, select “– – –”. Auto Tuning Tunes in all the available channels. You can retune the TV after moving house, or to search for newly launched channels.
  • Page 93 Allows you to fine-tune the selected channel manually if you feel that a slight tuning adjustment may improve picture quality. When “On” is selected, fine tuning adjustments are made automatically. Audio Filter Improves the sound of individual channels when distortion occurs in mono broadcasts in TV system “B/G”, “I”...
  • Page 94: Additional Information

    Installing the Accessories (Wall-Mount Bracket) To Customers: For product protection and safety reasons, Sony strongly recommends that installing of your TV be performed by Sony dealers or licensed contractors. Do not attempt to install it yourself. To Sony Dealers and Contractors: Provide full attention to safety during the installation, periodic maintenance and examination of this product.
  • Page 95 KLV-40V550A/ KLV-40V530A KLV-32V550A/ KLV-32V530A Figures in the above table may differ slightly depending on the installation. WARNING The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of...
  • Page 96 SU-WL500 SU-WL50B SU-WL500 SU-WL50B KLV-52V550A/KLV-46V550A/KLV-40V550A/ d, g d, i KLV-40V530A KLV-32V550A/KLV-32V530A e, g e, h SU-WL500: Screw location Hook location When installing the Mounting Hook on the TV. When installing the TV onto the Base Bracket. * Hook location “a” cannot be used for the models in the table above.
  • Page 97: Specifications

    Specifications Model name KLV-32V550A KLV-40V550A KLV-46V550A KLV-52V550A KLV-32V530A KLV-40V530A System Panel system LCD (Liquid Crystal Display) Panel TV system B/G, I, D/K, M Colour/video system PAL, PAL60 (only video input), SECAM, NTSC3.58, NTSC4.43 (only video input) Channel coverage B/G: VHF: E2 to E12 / UHF: E21 to E69 /CATV: S01 to S03, S1 to S41...
  • Page 98 PC input signal reference chart for PC and HDMI IN 1, 2, 3, 4 (HDMI IN 4: KLV-52/46/40/ 32V550A only) Resolution Horizontal Vertical Standard Signals Horizontal × Vertical frequency (kHz) frequency (Hz) (Pixel) (Line) × 31.5 VESA × 37.5 VESA ×...
  • Page 99: Troubleshooting

    For example, the indicator may flash three times, go off for two seconds, then flash again three times. Press 1 on the TV to turn it off, disconnect the mains lead, and inform your dealer or Sony service centre of how the indicator flashes (number of flashes).
  • Page 100 HDMI, you cannot select “Off” in this menu. If you want to change the audio output to the TV speaker, select “TV Speaker” in the “Speaker” menu (page 29). Not all channels are tuned for • Check the support website for cable provide information. cable. http://www.sony-asia.com/bravia/flash.html...
  • Page 101 Instructions on “Installing the Wall-Mount Bracket” are not supplied in the form of a separate leaflet with this TV. These installation instructions are included within this TV’s instructions manual. Customer support Printed in Malaysia...
  • Page 102 L6201 R6114 D6201 C6112 R6120 CN601 C6518 C6202 C6203 D6106 C6106 Q6102 F6101 D6103 FB6101 R6121 R6105 D6104 C6101 D6105 THP6101 VDR6101 R6202 R6201 R6206 C6519 C6104 C6201 R6203 R6118 C6109 R6104 C6114 LF6101 R6209 C6118 C6120 C6123 PH6102 Q6101 IC6102 IC6201 C6117...
  • Page 103 R6416 C6202 C6403 — L6402 C6405 R6415 CN6202 C6407 JW6202 R6413 L6201 — C6203 IC6201 R6120 C6411 L6401 JW6208 D6106 — C6518 D6403 R6417 PH6102 C6314 IC6102 C6123 C6513 Q6503 JW6117 D6402 C6402 — R6118 T6501 C6411 Q6502 JW6209 JW6211 R6522 —...

Table of Contents