Sony KLV-46V510A Service Manual page 11

POWER/STANDBY LED Diagnostic Description
Diagnostic Item
Description
Main Power
DC Alert1
TCON Error
HDMI
Backlight
Temp
HFR Error
Viewing the Self Check Diagnostic List
1. TV must be in standby mode. (Power off).
2. Press the following buttons on the Remote Commander within a second
of each other:
Channel 5
DISPLAY
The Self Check list displays.
NOTE: This is the same as accessing Service Adjustments.
The logo displays momentarily, then the Service Mode list
displays.
Service/ADC Auto Calibration
Version: ER2.6-C121 DTT: S255.P033.S077
Model: 40V510A
Serial : 8000016
Power on Time: 00000H
Diagnostic and Serial Update
ADC Auto Calibration
Clone User Setting
Direct Log to USB
Factory Default
Change
RETURN
KLV-40V510A/46V510A
Number of times
STANDBY lamp flashes
2 times
3 times
4 times
5 times
6 times
7 times
8 times
Volume +
POWER .
Back Exit
IP1 (Power) Board (KLV-40V510A Only)
IP2 (Power) Board (KLV-46V510A Only)
BM3 (Main) Board
IP1 (Power) Board (KLV-40V510A Only)
IP2 (Power) Board (KLV-46V510A Only)
LCD Panel
BM3 (Main) Board
LCD Panel
BM3 (Main) Board
LCD Panel
3. To display the Self Diagnostic list, press
Service Mode/Product Information
Version: ER2.6-C121 DTT: S255.P033.S077
Model: 40V510A
Power on Time: 00000H
Serial : 8000016
Diagnostic Information
2-MAIN POWER:
3-DC ALERT1:
4-TCON:
5-HDMI:
6-Backlight:
7-TEMP:
8-HFR:
101-WDT:
Change RETURN
4. To exit Service Mode, press
KLV-40V510A/46V510A
.
1
1 indicates an error was detected
0 0 indicates no error was detected
0
0
0
0
0
0
Back Exit
.
11