Settings; Introduction - Onkyo DR-635 Instruction Manual

4
Press the MENU button once to display the
programme list.
5
Highlight the first file in the programme list using
the , buttons.
6
Press the Enter button or the
programmed playback.
If you press one of the following buttons, the
programmed contents will be cleared.
INPUT (LINE, USB, FM)
Open/Close ( ) (in DVD mode),
K

Introduction

This chapter describes how to use the SETUP menu.
Most settings and adjustments are required to be set
when you first use the system.
24
/ button to start
B F
ON/STANDBY

Settings

1
Turn on the unit, and the connected television or
monitor.
The SETUP menu is available only in the DVD
Source mode or the USB Source mode. If another
source is selected, press the INPUT button on the
unit to select the DVD Source or the USB Source.
2
Press the SETUP button.
The setup menu appears on the screen.
To exit the setup mode, press the SETUP button
again.
Although it is possible to enter the setup menu while
playback is continuing (or in resume mode), not all
menu functions will be available. To expand the
number of available functions, press the Stop
button ( ) twice.
L
3
Use the , , , buttons to navigate the menus.
If no cursor is visible on the screen, use the
buttons to select a page.
Use the / buttons to highlight menu items within
the selected page.
Press the button to return to the upper menu.
/