System Setup Options - Dell Inspiron One 2305 Service Manual

System Setup Utility: Dell Inspiron One 2305/2310 Service Manual

System Setup Options

Inspiron One 2305
NOTE: Depending on your computer and installed devices, the items listed in this section may appear, or may not
appear exactly as listed.
Main
Displays the system name
System
Information
Displays the BIOS version number
BIOS Version
Displays the current date in mm/dd/yyyy format
System Date
Displays the current time in hh:mm:ss format
System Time
Displays the service tag of the computer
Service Tag
Displays the asset tag of the computer when the asset tag is present
Asset Tag
Processor
Information
Displays the processor information
Processor
Type
Displays the L1 cache size
L1 Cache size
Displays the L2 cache size
L2 Cache size
Displays the L3 cache size
L3 Cache size
Memory
Information
Indicates the amount of memory installed in MB
Memory
Installed
Indicates the amount of memory available in MB
Memory
Available
Indicates the memory speed in MHz
Memory Speed
Indicates the type of installed memory
Memory
Technology
Device
Information
Displays the SATA drive connected to the SATA 0 connector
SATA 0
Displays the SATA drive connected to the SATA 1 connector
SATA 1
Advanced
System
Configuration
Power
Management
file:///T|/htdocs/systems/InsOne2310/sr/sm/sys_setu.htm[7/25/2012 10:25:09 AM]
Onboard Audio Controller — Enabled or Disabled (Enabled by default)
SATA Mode — ATA Mode or AHCI Mode (AHCI Mode by default)
Onboard LAN Controller — Enabled or Disabled (Enabled by default)
Onboard LAN Boot ROM — Enabled or Disabled (Disabled by default)
UMA Frame Buffer Size — Auto; 32MB; 64MB; 128MB; 256MB; 512MB; 1024MB (Auto by default)
USB Controller — Enabled or Disabled (Enabled by default)
AC Recovery — Power On; Power Off; Last State (Power Off by default)
Remote Wake up — Enabled or Disabled (Enabled by default)
Auto Power On — Enabled or Disabled (Disabled by default)
Auto Power On Date — 0 to 31 (15 by default)
Auto Power On hour — 0 to 23 (12 by default)
Auto Power On minute — 0 to 59 (30 by default)
Auto Power On second — 0 to 59 (30 by default)