MXM Assembly (Optional): Dell Inspiron One 2305/2310 Service Manual
3
screws (3)
Replacing the MXM Assembly
1. Follow the instructions in
2. Align the notch on the MXM assembly with the tab in the MXM-assembly connector.
3. Insert the MXM assembly at a 45-degree angle into the MXM-assembly connector.
4. Replace the three screws that secure the MXM assembly to the chassis.
5. Replace the MXM-assembly fan (see
6. Replace the system-board shield (see
7. Follow the instructions from
8. Replace the back cover (see
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain
inside the computer. Failure to do so may result in damage to the computer.
9. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
file:///T|/htdocs/systems/InsOne2310/sr/sm/mxm_heat.htm[7/25/2012 10:24:57 AM]
Before You
Begin.
Replacing the MXM-Assembly
Replacing the System-Board
step 4
to
step 5
in
Replacing the Front
Replacing the Back
Cover).
Fan).
Shield).
Stand.