Dell Inspiron One 2305 Service Manual page 57

Processor Heat-Sink Fan: Dell Inspiron One 2305/2310 Service Manual
Back to Contents Page
Processor Heat-Sink Fan
Dell™ Inspiron™ One 2305/2310 Service Manual
Removing the Processor Heat-Sink Fan
Replacing the Processor Heat-Sink Fan
WARNING: Before working inside your computer, read the safety information that shipped with your
computer. For additional safety best practices information, see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
WARNING: The heat sink may be very hot during normal operation. Ensure that it has had sufficient time
to cool before you touch it.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to
servicing that is not authorized by Dell™ is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching an unpainted metal surface (such as a connector on your computer).
Removing the Processor Heat-Sink Fan
1. Follow the instructions in
2. Remove the back cover (see
3. Follow the instructions from
4. Remove the system-board shield (see
5. Disconnect the processor heat-sink fan cable from the connector (CPU FAN) on the system board.
6. Remove the two screws that secure the processor heat-sink fan to the chassis.
7. Carefully peel the silver foil from the processor heat sink.
8. Lift the processor heat-sink fan along with its cable away from the chassis.
NOTE: The appearance of the system board may vary based on your computer model.
file:///T|/htdocs/systems/InsOne2310/sr/sm/hs_fan.htm[7/25/2012 10:24:58 AM]
Before You Begin.
Removing the Back Cover).
step 2 to step 5 in Removing the Front
Removing the System-Board
Stand.
Shield).