Problems With Sound - Creative Sound Blaster Audigy 2 User Manual

Problems with
Sound
There is unexpected excessive environmental sound or effects when an
audio file is played.
The last selected preset is an inappropriate environment for the current audio file.
To switch to an appropriate environment:
1. Click the Audio Effects tab in EAX Console.
2. Click the Enable/Disable Audio Effects check box to clear it.
Note:The preset box title may change, depending on the effect you select.
No sound from the headphones.
Check the following:
❑ The headphones are connected to the Headphones jack.
❑ In the Speaker Selection tab of Creative Speaker Settings, the Headphones
option is selected in the Speaker/Headphone Selection box.
❑ In the Basic tab of Creative Surround Mixer, the recording source selected is
"What U Hear".
Individual analog recording sources are not displayed in Creative Surround
Mixer.
The following analog recording sources are combined in one recording control called
Analog Mix (Line/CD/TAD/Aux/PC), which is found in the Record panel of the
Basic tab:
❑ Line-In
❑ CD Audio
❑ Auxiliary
❑ TAD-In
❑ PC Speaker
Troubleshooting and FAQs B-2