Installation Steps; Step 1: Prepare Your Computer - Creative Sound Blaster Audigy 2 User Manual

Installation Steps

Step 1: Prepare your
computer
Turn off the main power
supply and disconnect your
computer's power cord.
Systems using an ATX power
supply unit with soft power
off may still be powering the
PCI slot. This can damage
your audio card when it is
inserted into the slot.
Remove any existing audio
card or disable the onboard
audio chipset. For more
information, see "Problems
with Multiple Audio Devices"
on page B-9.
1. Turn off your computer and all peripheral devices.
2. Touch a metal plate on your computer to ground yourself and to discharge any
static electricity, and then unplug the power cord from the wall outlet.
3. Remove the computer cover.
4. Remove the metal brackets from two adjacent unused PCI slots as shown in
Figure 1-3. Put the screws aside for use later.
A
A: metal bracket
B: PCI slot
C: ISA slot (may
not be present
on your
computer)
Figure 1-3: Removing metal plates
B
C
Installing Hardware 1-6