Parts of the Reader
Parts of the Reader
Scanning Modes
The reader can operate in one of several scanning modes:
Trigger Single — When the trigger is pulled, scanning is activated
until one of the following occurs:
- a programmable duration
- a label has been read
- the trigger is released
This mode is associated with typical handheld reader operation:
when the trigger is pulled, scanning starts and the product scans
until the trigger is released, or a label is read, or the maximum pro-
grammable duration
Trigger Hold Multiple — When the trigger is pulled, scanning
starts and the product scans until the trigger is released or a pro-
grammable duration
scanning. Double Read Timeout
reads while in this mode.
Trigger Pulse Multiple — When the trigger is pulled and released,
scanning is activated until programmable duration
the trigger has been pulled again to transition to another state.
Double Read Timeout
this mode.
1.
See the Product Reference Guide (PRG) for additional programmable fea-
tures, in this case: Scanning Active Time.
2.
Double Read Timeout is also programmed using the PRG.
10
Trigger
1
has elapsed.
1
has elapsed. Reading a label does not disable
2
prevents undesired multiple reads while in
LED
Scan
Window
1
has elapsed
2
prevents undesired multiple
1
has elapsed or
Gryphon™ L GD4300