TANDBERG 550 MXP User Manual page 26

D1374203_User_Manual_MXP_CCM
2.2.4 TANDBERG 2000 MXP for Cisco
CallManager
Connect the cables according to the drawing below. This drawing shows only the active
connectors. Some products may have additional non-working connectors.
1. Power cable
Connect the system power cable and monitor power cable to an electrical distribution socket.
2. Monitor cables
Connect the Video cable labelled "VGA IN, Main Monitor", the Audio cable (with adapter)
labelled "Audio Out" and the power cable to the monitor as shown on the figure.
3. Microphone cable
Connect the microphone cable to the microphone.
18