TANDBERG 550 MXP User Manual page 22

D1374203_User_Manual_MXP_CCM

Connect the power supply to the 'DC in' input on the system. Connect the power cable to
the power supply. Connect the power cable to an electrical distribution socket.
4. LAN Cable

To use the system on LAN, connect a LAN cable from the 'Ethernet' connector on the
system to your LAN.
5. Wireless LAN - Insert PC Card

Remove the "dummy" card by pressing the 'Eject' button next to the slot.

Insert the Wireless LAN PC Card.
Note! Make sure you insert the card in the right direction (with the product logo pointing
upwards). Push the card into the slot until the Eject button pops up.
See chapter Wireless LAN Settings
14
for configuration.