TANDBERG 550 MXP User Manual page 21

2.2.1 TANDBERG 550/770 MXP for Cisco
CallManager
1. Microphone Cable

Connect the microphone to the microphone cable.

Connect the microphone cable to microphone input 1 on the system.
2. Monitor Cable(s)
Scart (Europe):

Connect the Scart adapter to one of the Scart connectors on your monitor.
Scart (Europe) & RCA/S-Video (US):
Audio:

The cable with one RCA connector on one side and two RCA connectors on the other
side:
Connect the two RCA connectors to your monitor (or Scart adapter) Audio Left/Right
connectors (the audio signal from the system is a monaural signal and therefore is fed into
both audio-in sockets on the monitor).

Connect the other end to 'Audio Out'.
Video:

Connect the S-video cable to the S-video connector on your monitor (or Scart adapter). If
you do not have an S-video connector on your monitor, connect the RCA-RCA video
cable to the RCA connector on your monitor.

Connect the other end to 'Video Out'.
3. Power Cable
Installation
13