Life Fitness Models X5i, X5, X3i, and X3 Cross-Trainers
How To... Replace the OPTO Sensor - Version 1
Special Service Tools Required: NONE
1. Remove the Side Shrouds. See "How To..."
in this section.
2. Disconnect the OPTO Sensor Cable from
the Lower Frame Cable.
3. Remove the OPTO sensor by removing the
two Phillips screws while holding the OPTO
Sensor to the frame.
4. Install new OPTO Sensor in reverse order
ensuring that the chopper wheel is
centered.
OPTO
SENSOR
EDDY
CURRENT
ASSEMBLY
18