Idler And Coupler Assembly Components - Life Fitness X5i Service Manual

Life Fitness Models X5i, X5, X3i, and X3 Cross-Trainers
How To... Replace the Idler and Coupler Assembly Components
Special Service Tools Required: NONE
Clevis
Pin
Outer
Flat Washer
Outer
Retainer
Upper Cover
and Screw
Lower Cover
and Screw
1. Remove the Lower Rear Clevis Covers and then remove the Lower Link.
2. At the front end of the Lower Link, remove the Plug, Bolt, and Lock Washer and then the remaining components
as shown.
3. At the rear end of the Lower Link, remove the Retaining Ring and then remove remaining components as shown.
4. Install in reverse order.
Inner
Retainer
Inner
Flat Washer
Wave
Washer
Lower Link
Nut & Bolt
Lower
Link
Plug
Flat
Washer
Bolt
Lock
Washer
9
Retaining
Ring
Wave
Washer
Flat
Washer