Nstalling The Pci Card - Zoom PCI User Manual

Installing the PCI Card
1 1 1 1 Before you install the PCI card, make sure your
computer is turned off.
2 2 2 2
Take the cover off your computer. You will probably have to
remove several screws on the back of the case; most likely,
they are near the outer edges.
3 3 3 3
Remove the cover plate from an available PCI slot. (You'll
have to remove another couple of screws.)
Static electricity can damage components on your
modem or inside your computer. Before removing
the board from its bag, touch the computer's metal
CAUTION
chassis to statically discharge yourself.
4 4 4 4
Remove the ADSL PCI card from its antistatic bag and note
its Serial Number (located on the side of the bracket) below:
(Should you ever need to contact Customer Support, you will
need this Serial Number and it won't be visible once you've
completed the installation.)
PCI Serial Number____________________________
5 5 5 5
Insert the card firmly into an available PCI slot. See the
following illustration:
Be sure the bracket is lined up properly, then screw the
bracket into the computer using the screw you removed with
the cover plate. Be sure that the back end of the card (smaller
gold finger area) is properly seated into the connector.
8
Electrostatic Discharge Protection
PCI Slot
Zoom ADSL Modem User's Manual