Objects And Functions In The Lcd Screen - Korg Karma Basic Manual

Objects and functions in the LCD
screen
a: Current page
b: Tab
c: Parameter
a: Current page
This indicates the currently selected page within
the mode. From the left, this area shows the mode
name, page number:name, tab name, and the
parameter name of the edit cell.
Mode name Page number:name
b: Tab
Most pages are divided into two or more tabs. By
pressing the closest function key [F1]–[F7], you can
select a tab to access the corresponding page.
c: Parameters
The parameters for various settings are displayed
in the LCD screen. Use cursor keys [ ], [ ], [ ],
[ ] to select the desired parameter.
d: Edit cell
When you use the cursor keys [ ], [ ], [ ], [ ],
the selected parameter will be highlighted in the
LCD screen. This area is called the edit cell, and
your editing will affect the highlighted area.
The parameter value of the edit cell can be modi-
fied using VALUE controllers such as the [VALUE]
slider, [VALUE] dial or the VALUE [ ], [ ] keys
( p.15). For parameters that accept a key number
or a velocity value, you can also hold down the
[ENTER] key and play a note on the keyboard to
enter the key number or velocity value.
e: Check box
Use cursor keys [ ], [ ], [ ], [ ] to select a check
box (edit cell), and use a VALUE controller such as
the [VALUE] slider, [VALUE] dial or the VALUE
[ ], [ ] keys to add or remove the check mark.
When checked, the parameter will function, when
unchecked, the parameter will not function.
10
d: Edit cell
e: Check box
f: Function buttons
Parameter name
Tab name
f: Function buttons
By pressing the function key [F1]–[F8] nearest this
button, you can turn various functions on/off.
:
In Combination, Sequencer, or Song Play modes,
these are used to select the KARMA module that
you wish to edit.
, :
In Song Play mode or Disk mode, these select the
current directory.
:
Accesses the utility menu where you can execute
utility menu commands.
Other function buttons examples
Sequencer EDIT/DONE, INSERT, CUT,
mode: COPY, JUMP, DONE, Tie, Rest,
Back, Done (used in Cue List, Event
Edit, Step Recording)
REVERT (copy and paste RPPR set-
tings)
Song Play ADD, DELETE (create jukebox list)
mode:
Global TEXT, KEY+, –
mode:
* Utility menu
In each page, you can press the "UTILITY" func-
tion button (the [F8] key) to access the utility
menu. The utility menu contains commands that
can be used in that page. The utility menu that
appears will differ depending on the page that is
selected.
You can also select up to ten utility menu com-
mands by holding down the [ENTER] key and
pressing a numeric key [0]–[9]. Press the [EXIT]
key to close the utility menu.
For , press the [F7] key to select the desired
utility menu command. You can also use the cursor
keys [ ], [ ], [ ], [ ] to make your selection. For
, press the [F8] key to open the dialog box of
the selected utility menu command.
This key also switches the status of commands that
you check or uncheck.
* Dialog boxes
When you select a utility menu command etc., a
dialog box will open.
Use the cursor keys [ ], [ ], [ ], [ ] to select
parameters. Use the VALUE controllers (
input the parameter values. When selecting pro-
gram or combination numbers in a dialog box, you
can use the BANK [A]–[G] keys in addition to the
VALUE controllers.
As in the utility menu, press the function key [F1]–
[F8] nearest etc. (function button 2) to access
p.15) to