Operating The Karma Realtime Controls; Settings For Karma Module Operation ("Run" And "Solo" Settings) - Korg Karma Basic Manual

as a solid line. Input notes within the key zone will be
used to trigger and control the phrase or pattern.
Notes outside the zone may be optionally used to con-
trol other KARMA functions.
G
In COMBI 1.1: Play, press the [F6] key to select the
KARMA Note Activity page.
When you play the keyboard or press a CHORD TRIG-
GER [1]–[4] key, "[A], [B], [C], [D]" will indicate the
name of the chord detected by each KARMA module.
(Chord detection may differ depending on the setting
of the KARMA module.) The "Note Activity Display"
will indicate the note-on/off status generated by each
KARMA module.
The key zone settings of the four KARMA modules are dis-
played as a solid line.
Operating the KARMA Realtime Con-
trols
You can use the KARMA Realtime Controls to control
the KARMA function in the same way as for a pro-
gram.
The state of the KARMA Realtime Controls knobs
and switches is saved when you write the combi-
nation.
Name display for knobs [1]–[8] and
switches [1]/[2]
As for a program, the knobs and switches specified for
the combination are displayed as graphics and by
name.
In a combination, the square brackets [ ] show the cate-
gory of the program used by the timbre controlled by
the KARMA Realtime Controls knobs and switches. If
multiple timbres are being controlled simultaneously,
this will indicate [MLTI].
From the KARMA Realtime Controls knobs and
switches, you can determine which timbre's phrase is
being controlled.
30
Settings for KARMA module operation
("Run" and "Solo" settings)
In Combination mode, up to four KARMA modules
can operate simultaneously.
When the KARMA function is off, all KARMA mod-
ules will be stopped. When the KARMA function is
on, the KARMA module(s) that you specify here will
operate.
1 In COMBI 1.1: Play, press the [F4] key to select the
KARMA page.
2 Use "Run" and "Solo" to specify the module(s)
that will operate when KARMA is on. ( PG p.47
COMBI 1.1-4b)
The KARMA modules for which "Run" is On
(checked) will operate.
If you turn "Solo" On (checked) for a KARMA
module, only that module will operate. This is use-
ful when you are selecting a GE or when you wish
to check the phrase that is played.
A module for which "Solo" is On (checked) will
operate even if "Run" is Off (unchecked).
The "Solo" setting will be cleared when you change
combinations. It will not be memorized even if you
write the combination.
KARMA module [A] will operate
KARMA module [B] will operate
KARMA modules [A] and [B] will operate