Bosch CM12 Operating/Safety Instructions Manual page 8

BM 2610021316 10-11 E:BM 2610021316 10-11 E.qxp 10/17/11 11:02 AM Page 8
26
36
11
12
13. Kerf Insert – Kerf inserts can be adjusted to dif-
ferent blade widths to minimize workpiece tear out.
14. Miter Detent Override – Allows detent action to
be locked out allowing for adjustments to any miter
angle.
15. Miter lock Knob – The miter lock knob locks
the miter saw table at any desired miter angle.
16. Miter Detent lever – The lever releases the
table from the detent.
17. Miter Scale/Miter pointer – The pointer rotates
with the table and blade. It points to the miter scale
to indicate the angle setting before a cut is made.
18. Miter Detents plate – There are ten (10) miter
detent slots for fast and accurate miter cuts of com-
mon angles. The position of the plate can be ad-
justed to set the accuracy of its detent locations.
10
25
27
2
9
1
33
8
21
29
12
24
20
19
18
22
19. Miter Detent plate Screws – Four screws ac-
cessible through holes in the miter scale. The
screws are loosened when adjusting detent plate
position.
20. Table – Sits in base, provides workpiece sup-
port, rotates for desired miter cuts and rotates the
head assembly.
21. Sliding Base Extensions – Provides working
surface to support workpiece, expands to support
longer materials.
22. Base Extension Clamping levers – Lock the
base extensions at the desired positions.
23. Tool Mounting pads – The four corners of the
saw provide areas to clamp, bolt or nail/screw the
saw to a flat work surface.
24. Dust Chute – Directs sawdust up and through
elbow to the dust bag.
-8-
FIG. 1
6
7
28
14
15
16
13
17