Ieee 802.1Q Vlan - TRENDnet TEG-160WS User Manual

Speed:
The 1000BASE-T connections can operate in Forced Mode settings
(1000M Full, 100M Full, 100M Half, 10M Full, 10M Half), Auto, or
Disable. The default setting for all ports are Auto. The mini-GBIC
(Gigabit Fiber) connections can operate in Forced Mode settings
(1000M Full), Auto, or Disable
Flow Control:
This setting determines whether or not the Switch will be handling
flow control. Set Flow Control to Enable for avoiding data transfer
overflow. Or it sets to Disable; there is either no flow control or other
hardware/software management.
When the port is set to forced mode, then the flow control will
automatically set to Disable.
QoS:
Displays each port's 802.1p QoS priority level for received data
packet handling. Default setting for all ports is Middle. You can
change the priority settings in 802.1p Default Priority.

IEEE 802.1Q VLAN

A VLAN is a group of ports that can be anywhere in the network, but
communicate as though they were in the same area.
VLANs can be easily organized to reflect department groups (such as
R&D, Marketing), usage groups (such as e-mail), or multicast groups
(multimedia applications such as video conferencing), and therefore
help to simplify network management by allowing users to move
devices to a new VLAN without having to change any physical
connections.
29
The IEEE 802.1Q VLAN Configuration page provides powerful VID
management functions. The original settings have the VID as 01,
named "default", and all 16 ports as "Untagged".
Asymmetric VLAN
IEEE 802.1Q Asymmetric VLAN default setting is "Disabled", you
can press "Enabled" ratio button and Apply it to submit the
Asymmetric VLAN function.
Enabled Asymmetric VLAN function
Change setting warning message
Note: The Settings of VLAN, IGMP Snooping and Forwarding Table will be reset to
default.
30