WIRING HARNESS, CABLE, HOSE ROUTING AND SENSOR
INSTALLATION
WIRING HARNESS ROUTING (For SV650/S)
*2
1 Throttle cable
2 ISC valve coupler
3 Clutch cable
4 Rectifier
5 Clamp
Push down speed sensor coupler to between
*1
frame and wiring harness. (For SV650S)
Clamp the speed sensor wiring harness.
*2
(For SV650S)
*3
*4
*5
*6
*3 To fan motor.
*4 Clamp harness without contact to bracket.
*5 Be careful for the lead wire not to be slackened.
Base for assembling (White tape)
*6
TPS branch wire : Set upward
Set coupler inside triangle area between frame
*7
and fender.
Set rear turn and licence lamp leads pulled to
*8
upside of rear fender.
SV650K7/SK7/AK7/SAK7 ('07-MODEL)
*1
*8
*7
129