3.2 Failure Diagnosis
Activation failure
•Burnt out fuse
•Low storage battery
•Broken main switch
•Broken starting clutch
•Broken brake switch
•Broken stating relay
•poor contact of connecting line
•Broken starting motor
3.3 Starting Motor
3.3.1 Dismounting
* Note
Before unloading the starting motor, turn the main switch
to "OFF" first; remove the bond strap of the storage battery,
then turn the power source on the see if the starting motor is
working to ensure the security.
Remove the wire clip of the starting motor first.
Remove the fixed bolt of the starting motor and unload the
motor.
Roll up the rubber overshoe and pull down the adaptor of the starting motor.
3.3.2 Breaking Down
Unload the screws in the outer cover, the front cover, the
motor cover and other parts.
3.3.3 Inspection
Check other component assembling.
Replace for a new one when there is wear, fragment or
Weak rotating force
of the starting motor
·Low storage battery
•Poor contact of connecting line
•The gear of the starting motor is
Blocked by foreign matters.
Starting motor is rotating
well while the engine is not
•Broken starting clutch
•anticlockwise revolution of the starting motor
•Low storage battery
Commutator
- 68 -