KEEWAY F-ACT EVO Instruction & Maintenance Manual page 34

Two-wheeled motorcycle f-act evo
Table of Contents

Advertisement

Failure diagnosis procedure when the steering lamp does not work
Some steering lamps on one
side do not work
Remove the steering lamp
cover and check if the bulb of
steering lamp is burnt out
Yes
Use the voltmeter
Replace
to measure the
the bulb
voltage between
of
the lamp stand
steering
power
lamp
contact
negative pole
Voltage
No
indicates
indicates
The lamp stand is
The power
grounded
line
improperly or the
lamp
connection
stand
between steering
broken
lamp
bulb and
lamp stand is in
bad contact
Disconnect the insert connector of steering lamp switch, use
a lead to short-circuit the power input lead of the steering
lamp switch with the power leads connecting to left and
right steering lamps respectively
The steering lamp will
work after short-circuiting
The internal contact of
steering lamp switch is in
bad contact
The steering lamp does not work
Steering lamps on one side do not work
Remove the steering lamp
cover and check if the bulb of
steering lamp is burnt out
No
Yes
Replace
the
bulb
of steering
lamp
line
and
Yes
voltage
The
output
power
line
on
the
failure
side
of
is broken or
the
lamp
is
stand
is
grounded
improperly
The steering lamp still does not work after
short-circuiting
Testing lamp works
The power lead of the steering
lamp is broken or short-circuited
No
Disconnect
the
The electric horn
steering lamp switch
sounds loudly
insert connector, use
the ohmmeter to test
if the failure side of
The
steering lamp switch
supply in storage
has been solved
battery
No
insufficient
The
internal
contact
of
steering lamp is
in bad contact
No
Toggle the steering lamp switch,
use one lead or screwdriver to
short-circuit the two
scintillator
The steering lamp still does not work after
short-circuiting
Use lamp-testing method to check if there is power output
from the power input lead of the steering lamp switch
- 33 -
All the steering lamps do not work
Press the horn button to check the
working condition of electric horn
The electric horn
does not sound or
sounds raucously
electricity
The electricity supply
in storage battery is
is
insufficient
Remove the steering lamp cover
and check if the bulb of steering
lamp is burnt out
Replace the steering
lamp bulb, at the
lugs of
same time check if
the
regulator works well
The steering lamp will
work after short-circuiting
The scintillator
is damaged
Testing lamp does not work
The line from ignition switch to
scintillator
or
the
line
scintillator to steering lamp switch
is broken or short-circuited
Yes
commutation
from

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents