KEEWAY F-ACT EVO Instruction & Maintenance Manual page 147

16.3 Crankcase
16.3.1 The Disassembly of Crankcase
Unscrew the bolt and remove the driving motion gear.
Remove the gear.
Dismantle the fixed bolt of crankcase
Dismantle the crankcase on both sides.
Note:
The gasket should be avoided from damage.
Remove the gasket and dowel.
Remove the crank axle from the crankcase.
Clean the gasket on the faying surface of crankcase.
Note:
No damage should be done to the faying surface of
crankcase.
Bolt
Dowel
- 146 -
Driving
Motion
Gear
Gear
Bolt
Gasket
Crank Axle