KEEWAY F-ACT EVO Instruction & Maintenance Manual page 108

Gas leaks
9.3 Tank/seat cushion
9.3.1 Removing
Open the seat cushion（1） 。
Remove the seat cushion fixing bolt（4） 。
Remove machine oiler protection cover.
Remove the machine oiler.
Remove the cushion and helmet bucket.
Remove the rear container assembly.
Remove the left/right rear protection plate
component.
Remove the rear shelf assembly and rear installation
component of the helmet bucket.
Turn the tank switch to ―OFF‖
Disconnection: fuel hose
Remove the tank from the frame.
Note:
Refer to the detailed assembly and disassembly view on page
99,100,101.
9.3.1Installation
Conduct in a sequence contrary to the ―removing‖
Installation value:
Rear shelf fixing bolt 22-29 N·m
Tank fixing bolt 5 - 9 N·m
Helmet bucket fixing bolt 5 - 9 N·m
- 107 -