Removing The Lamp Thermistor - Epson PowerLite 5000 Service Manual

EPSON PowerLite 5000 Service Manual
PBS Thermistor
PBS Thermistor
Figure 3-27
1. Remove the cable clamp screw mounting the PBS thermistor to the power supply unit
chassis.
2. Separate the PBS thermistor from the cable clamp.
3. Disconnect the cable from connector CN860 on the main board.

3.2.14 Removing the Lamp Thermistor

Prerequisite conditions: 3.2.3/3.2.4/3.2.8/3.2.13
Lamp Thermistor
Figure 3-28
3-22