Removing The Upper Case Unit And Handle - Epson PowerLite 5000 Service Manual

EPSON PowerLite 5000 Service Manual

3.2.3 Removing the Upper Case Unit and Handle

Prerequisite conditions: None.
Handle Holder Cover
Screws
1. Pull the handle up.
2. Remove 2 screws under the handle.
Screw: +M4×10 F/ZB Bind: P/N1033707
(mounting torque: 6.0 kg. cm = 5.2 lb. inch)
3. Remove 2 upper case unit mounting screws on the right.
Screws: +M4×6 F/ZB: P/N1034318
(mounting torque: 6.0 kg. cm = 5.2 lb. inch)
Figure 3-5
Figure 3-6
3-8