Power On - Brady BMP 71 User Manual

15

Power On

Unloading Labels
Power On
To turn the system on or off:
Press Power .
1.
After a user defined amount of time of non-use, the printer automatically shuts down. Press the
[Power] key again to restart. (For more information, see "Setup Printer Configuration" on
page 32.)
The first time the printer is turned on, you will want to choose a language in which to display
screen items. Language selection is performed in the Setup function. (For more information,
see "Setup Language" on page 28.)
Whenever the printer is powered on, the system performs an initialization process. Part of this
process is recognizing the ribbon and label part installed. If the ribbon or label is not installed,
an error message displays. While it is possible to power on the printer without installing ribbon
or labels, if you choose not to install any, the printer reverts to the last label and ribbon
installed in the printer.
Be aware that reverting to the last known label part can affect the layout of new labels being
created if they differ from what was previously installed.
BMP71 User's Manual