Operation Modes - Panasonic CS-V18DKE Service Manual

CS-V18DKE CU-V18DKE / CS-V24DKE CU-V24DKE
I Operation Details
AUTO - Automatic Operation
• The unit will automatically select the
operation mode according to the
room temperature.
• Once the operation mode is
selected, the unit will operate at the
standard setting temperature as
shown:
Room Operation
temperature
23°C & above
Below 23°C
• You may press
to change the standard setting
temperature to "HI" or "LO" as
shown:
Operation mode
Cool
Dry
COOL - Cooling Operation
• Enables you to enjoy the cooling
effect at your preferred setting
temperature.
• The range of temperature can be
selected from 16°C ~ 30°C.
DRY - Soft Dry Operation
• Enables you to set the desired
temperature at low fan speed which
provides you with the dehumidifying
surroundings.
• The range of temperature can be
selected from 16°C ~ 30°C.
Hint
G To save electricity, close the curtains when using air conditioner to prevent sunlight and heat from coming in.
Troubleshooting
G The room has a peculiar odour.
G Air conditioner does not cool effi ciently.
HOW TO OPERATE
Auto, Cool, Auto, Cool, Dr y
Standard
setting
mode
temperature
Cool 25°C
Dry 22°C
or button
Select the
HI LO
desired
27°C 23°C
operation.
24°C 20°C
G Supersonic air purifying device (super alleru-buster) operates
automatically while the air conditioner is switched on.
G Powerful, Quiet and Ion operations could be activated in all

operation modes.

G Press
Dr y
2 2
button again to stop the operation.
➤
This may be a damp smell emitted by the wall, carpet, furniture or
clothing in the room.
➤
Ensure the temperature has been set correctly.
➤
Ensure windows and doors have been closed properly.
➤
Ensure fi lters are cleaned or replaced when necessary.
➤
Ensure inlet and outlet vents of outdoor unit have not been obstructed.
30
1 1
Start the
operation.
3 3
Set the
temperature.