Privacy - Siemens ROLMphone 120 Series User Manual

Privacy

The Privacy feature lets you
• prevent callers from using the Busy Override feature to break
through to your extension when you are on a call
• prevent another party with the same multiple line appearance from
bridging (joining) your call
• prevent callers from queuing for your phone
• exclude a party that has bridged (joined) your call
If your phone has been set up at the communications server for
Automatic Privacy, all calls you make are private unless you turn off
the Privacy feature.
If your phone has been set up for Manual Privacy, you must turn on the
Privacy feature whenever you want a call to be private.
When Privacy is on, the status light next to the Privacy key is also on.
If your phone does not have a Privacy key, ask your system
administrator if your phone has been set up for Automatic Privacy.
For further information about the features affected by Privacy, see the
following sections:
• "Bridged Call" on page 3-1
• "Busy Override" on page 3-3
• "Hold" on page 2-14
• "Busy Standby Queuing" on page 3-4
To turn on
Privacy during a
call
To cancel
Privacy during a
call
6-2 ROLMphone 120/240/400 Series User Guide
Press the Privacy key, or press the Transfer
(TRANSFR) key and dial # 2. The Privacy
status light turns on.
Press the Privacy key, or press the Transfer
(TRANSFR) key and dial # # 2. The
Privacy status light turns off.