Evf - Hitachi DZ-MV580EAU Service Manual

Adjustment > Adjustment Procedure

6-4-11 EVF

Note:
1) Perform EVF only after replacing IC3701 and its peripheral components, MAN-H/MAN circuit
board or EVF unit, or executing "Initial Data Write".
2) Neither light box nor chart is needed for EVF adjustment.
Before performing any adjustments for EVF, be sure to shift the DVD video camera/recorder to the
test mode using the procedure below, and then display the EVF ADJUSTMENT MENU.
Procedure:
1) Choose EVF on the ADJUST MENU screen.
2) Click the EXECUTE button on ADJUST MENU screen
to shift the DVD video camera/recorder to the test mode.
The progress status can be confirmed using the
PROGRESS STATUS dialog.
3) When the DVD video camera/recorder has shifted to the
test mode, the viewfinder screen will be black and white
(see Fig. 6-4-12), and the EVF ADJUSTMENT MENU
will appear on the PC monitor screen.
Fig. 6-4-12 EVF Screen
ADJUST MENU screen
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
MODEL NAME:
ADJUST MENU
CONNECTION
PROGRESS STATUS dialog
EVF ADJUSTMENT INITIALIZE
PLEASE WAIT A MOMENT
EVF ADJUSTMENT MENU screen
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
EVF ADJUSTMENT MENU
CONNECTION
6 - 41
××××
DATA INITIALIZE
VIDEO LEVEL
BURST LEVEL
SAMPLING PULSE
AUTO FUCUS
AUTO IRIS CONTROL
MATRIX
CHROMA GAIN
SPOT NOISE
LCD
1
EVF
2
EXECUTE
RETURN
EVF ADJUSTMENT MENU
PLL
CONTRAST
BRIGHT
WHITE BALANCE
EXECUTE
RETURN