Hitachi DZ-MV580EAU Service Manual page 110

Adjustment > Setups for Adjustment
Information:
When communications between the PC and DVD video
camera/recorder are normal during adjustment, the word
"CONNECTION" in status bar (bottom left) of each screen
will flash.
6) Choose the radio button of corresponding model name in
MODEL SELECT screen.
Name of model
to be adjusted
DZ-MV580E/MV580E(UK)
DZ-MV580E(AU)/
MV580E(SW)/MV580E(SWH)
DZ-MV550E/MV550E(UK)
DZ-MV550E(AU)/
MV550E(SW)/MV550E(SWH)
Information:
The symbols in parentheses ( ) in the above model
names show the destinations and are displayed only
on packing box.
Refer to "2-5 Differences in Rating Labels and
Difference in Function" when checking the body of
DVD video camera/recorder to judge its destination.
7) Click the ENTER button in MODEL SELECT screen,
and then proceed with the ADJUST MENU screen.
Start of the adjustment program is now complete. Refer
to "6-3 Adjustment Procedure" for subsequent
operations.
If there is an error in model selection, the FILE
HANDLE ERROR dialog will appear. Click the OK
button, and then choose the correct model.
Note:
If the FILE HANDLE ERROR dialog appears when the
correct model has been chosen, obtain (download) the
newest adjustment program, and then start over again.
If the FILE HANDLE ERROR dialog still appears with the
newest adjustment program, check with the factory.
Corresponding model name
on MODEL SELECT screen
DZ-MV580E
DZ-MV580ESW
DZ-MV550E
DZ-MV550ESW
6 - 18
MODEL SELECT screen.
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
MODEL SELECT
× × × ×
× × × ×
× × × ×
× × × ×
7
ENTER
6
CONNECTION
ADJUST MENU screen.
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
××××
MODEL NAME:
ADJUST MENU
DATA INITIALIZE
VIDEO LEVEL
BURST LEVEL
SAMPLING PULSE
AUTO FUCUS
AUTO IRIS CONTROL
MATRIX
CHROMA GAIN
SPOT NOISE
LCD
EVF
EXECUTE
CONNECTION
FILE HANDLE ERROR dialog
ERROR
!
File hundle error. [SYMBOL FILE]
OK
EXIT
RETURN