Hitachi DZ-MV580EAU Service Manual page 101

Adjustment > Creating Reference Data
(2) Termination
1) Click the RETURN button on MENU screen of program to return to the MODEL SELECT
screen.
2) Click the EXIT button on the MODEL SELECT screen.
Information:
If the PC does not accept any operation during work, or the reference data creating program does
not work, perform the following procedure:
1) Set the power switch of reference data creating device to "OFF".
2) Turn off the DC power supply of DSP-R interface jig.
3) Simultaneously press the Ctrl, Alt and Delete keys on PC keyboard to restart the PC.
4) After the PC restarts, set the power switch of reference data creating device to "VIDEO" and
turn on the DC power supply of DSP-R interface jig again.
5) Restart the reference data creating program.
6 - 9