Table of Contents
Advertisement
PTZ Button
Pressing the
PTZ
button enters the PTZ (Pan/Tilt/Zoom) mode which allows you to control properly configured cameras.
Panic Button
Pressing the
button starts panic recoding of all camera channels, and displays on the screen. Pressing the button
PANIC
again will stop panic recording.
LED
Power LED: The Power LED is lit when the unit is On.
Network LED: The Network LED is lit when the unit is connected to a network via Ethernet.
eSATA LED: The eSATA LED is lit when an eSATA device is connected to the DVR.
HDD LED: The HDD LED flickers when the DVR is recording or searching video on the hard disk drive.
Display Button
Pressing the
button toggles between different display formats. The available formats are: PIP, 2x2, 3x2, 3x3,
DISPLAY
or 4x4.
Monitor Button
Pressing the
MONITOR
button toggles the monitor selection between Main and Spot. You can select the screen format
and sequence monitoring of the selected monitor.
Bookmark Button
When in the playback mode, pressing the
moves to the registered bookmark point.
Freeze Button
Pressing the
FREEZE
button freezes the current live screen.
Alarm Button
The
button has two functions. First, it will reset the DVR's outputs including the internal buzzer during an
ALARM
alarm. Second, it will display the event log when you are in the live monitoring mode unless there is an active alarm.
button adds the current playback point to the bookmark list or
BOOKMARK
Digital Video Recorder
9
Advertisement
Table of Contents
