Card Reader Board - HP ProBook 4535s Service Manual

Card reader board

Description
Card reader board
Before removing the card reader, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Bottom door (see
b. Optical drive (see
c. Keyboard (see
d. Top cover (see
Remove the card reader:
1. Position the top cover upside-down with the front toward you.
2. Remove the tape that secures the cable to the Touchpad button board (1).
3. Disconnect the cable from the connector on the Touchpad button board (2).
4. Remove the Phillips PM2.5×5.0 screw (3) that secures the card reader board to the top cover.
64 Chapter 4 Removal and replacement procedures
Battery on page 41).
Bottom door on page
Optical drive on page
Keyboard on page 57)
Top cover on page 59)
43).
44)
Spare part number
646292-001