Western Digital TV Live HUB User Manual page 76

2. After connecting the media player to your TV and turning it on, the network setup
wizard starts up. Press
Wireless Setup Options
You have four options for setting up your wireless network:
Automatic – Select an available access point found by the media player.
Manually enter the wireless network name – Use the on-screen keyboard to
input the network name (SSID) manually (when SSID not set to broadcast).
Wi-Fi Proctected Setup (WPS) – Enter a PIN or push the WPS button on the
router (if available).
Windows Pairing Code – This option is only available via the Setup menu. See
"Get Windows Pairing Code (Windows 7)" on page 189
Note: The recommended setting on Wireless N routers is 802.11n-only with a channel width of 20/40
MHz. If you are using a wireless-N access point (AP) and it has been set to operate in 802.11n mode
with a security setting of anything other than WPA2-PSK+AES or None, then media player will operate
at lower 802.11g rates. Disabling wireless security is not recommended.
Auto Search or Manually Enter Wireless Network Name
1. Press / to select your language in the setup wizard Welcome screen, then
press OK.
2. Auto Search: Press
OK. Proceed to step 5.
Manual: Depending on your wireless network setup, you may want to manually
type in the name of your network. In this case, navigate to the keyboard icon on
the right side of the screen, press OK, and proceed to the next step.
/ to select your language, then press OK.
/ to select your wireless network from the list, and press
WD TV Live Hub Media Center
User Manual
NETWORK SETUP – 71