Western Digital TV Live HUB User Manual page 214

To update the firmware automatically:
1. Press HOME, then select New Firmware. Press OK.
2. Select Update device on the firmware update prompt, and then press OK. This
restarts the system. You can also select What's New in This Update? to see
the changes.
3. After restarting, the system automatically enters firmware upgrade mode.
4. Once the update process finishes, the media center restarts. When the media
center restarts, the new firmware loads automatically.
Manual
To update the firmware manually:
1. Go to http://support.wdc.com
the media center.
2. Click "Downloads," then the product name (or photo). Download the WD TV Live
Hub media center firmware zip file to your computer.
3. Using an unzip utility, extract the zip file contents to the root directory of a USB
device connected to your computer.
4. Safely remove the USB device from the computer and attach it to the media
center.
5. Connect the USB device to the media center's USB port. If the Sync and
Transfer screen appears, select Cancel, then press OK.
6. Follow steps 1-4 under "To update the firmware automatically:" on page 209.
7. If the Sync and Transfer screen appears, select Cancel or OK if you want to
access video, music, or photo files on the attached USB device.
and download the latest firmware update file for
WD TV Live Hub Media Center
User Manual
SYSTEM MAINTENANCE – 209