Installation Procedure - Western Digital TV Live HUB User Manual

Installation Procedure

The media center installation procedure is outlined below:
1. Connect the power cable.
2. Establish a network connection.
3. Transfer content from your computer to the media center.
4. Connect the media center to your TV or entertainment unit through the desired
interface option.
5. Connect a USB device containing your media content (optional).
Step 1 - Connecting the Power Cable
1. If applicable, connect the power clip to the power cable plug.
The AC power adapter will vary, depending on your location. Some locations do
not require a power plug clip. Units sold in those locations will have a fixed power
plug. Refer to the illustration below.
EU/KO
US/JA/TW
Installing
2. Connect the power cable to the media center's DC connector, and then plug the
opposite end into an AC power outlet. The media center powers up
automatically.
US/JA/TW
Removing
WD TV Live Hub Media Center
EU/KO
Installing Removing
GETTING STARTED – 11
User Manual